 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HS-7239/HS-7239M Pentium(R) M/ Celeron(R) M PCI-ISA Bus Industrial Single Board Computer *CompactFlash*DDR* *DVI-I/CRT/LVDS Panel*LAN*Audio* ATA/33/66/100*RS-232/422/485* *4 COM*USB2.0*WDT*H/W Monitor* *PCI-ISA Bus Industrial Single Board computer* Copyright Disclaimers The accuracy of contents in this manual has passed thorough checking and review before publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for any infringements of patents or other rights resulting from its use. The recording) of this document, in whole or partly, is prohibited, unless granted permission by BOSER Technology Co., Ltd. BOSER Technology Co., Ltd. reserves the right to change or improve the contents of this document without due notice. BOSER Technology Co., Ltd. manufacturer will not be responsible for any direct, indirect, special, incidental or consequential damages arising from the use of this product or documentation, even if advised of the possibility of such damage(s). This manual is copyrighted and BOSER Technology Co., Ltd. reserves all documentation rights. Unauthorized reproduction, transmission, translation, and storage of any form and means (i.e., electronic, mechanical, photocopying, assumes no responsibility for any errors or omissions that may appear in this manual, nor does it make any commitment to update the information contained herein. Trademarks Trademarks BOSER is a registered trademark of BOSER Technology Co., Ltd. ISB is a registered trademark of BOSER Technology Co., Ltd. Intel is a registered trademark of Intel Corporation. Award is a registered trademark of Award Software, Inc. AMI is a registered trademark of AMI Software, Inc. All other trademarks, products and or product names mentioned herein are mentioned for identification purposes only, and may be trademarks and/or registered trademarks of their respective companies or owners. (c) Copyright 2005 BOSER Technology Co., Ltd. All Rights Reserved. Edition 1.1 March 22, 2005 Table of Contents Chapter 1 1.1 1.2 1.3 General Description ..................................1 Major Features ............................................................. 2 Specifications .............................................................. 3 Board Dimensions....................................................... 4 Chapter 2 2.1 2.2 Unpacking ..................................................5 Opening the Delivery Package ................................... 5 Inspection..................................................................... 5 Chapter 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 3.20 Hardware Installation ..............................7 Before Installation ....................................................... 7 Board Layout ............................................................... 8 Jumper List .................................................................. 9 Connector List ............................................................. 9 Configuring the CPU ................................................. 10 System Memory ......................................................... 10 VGA Controller............................................................11 PCI E-IDE Drive Connector ....................................... 12 Floppy Disk Drive Connector ................................... 15 Serial Port Connectors.............................................. 16 Parallel Connector..................................................... 17 Ethernet Connector ................................................... 18 USB Connector .......................................................... 18 CMOS Data Clear ....................................................... 18 Power and Fan Connectors...................................... 19 Keyboard/Mouse Connector .................................... 19 System Front Panel Connectors.............................. 20 Watchdog Timer......................................................... 20 Audio Connectors ..................................................... 21 CompactFlash Connector ...................................... 22 Chapter 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 4.14 4.15 4.16 Award BIOS Setup .................................23 Starting Setup ............................................................ 23 Using Setup................................................................ 24 Main Menu .................................................................. 25 Standard CMOS Features ......................................... 26 Advanced BIOS Features ......................................... 27 Advanced Chipset Features ..................................... 28 Integrated Peripherals............................................... 29 Power Management Setup........................................ 31 PnP/PCI Configurations ............................................ 32 PC Health Status........................................................ 33 Frequency/Voltage Control....................................... 33 Load Fail-Safe Defaults............................................. 34 Load Optimized Defaults .......................................... 35 Set Supervisor/User Password ................................ 35 Save & Exit Setup ...................................................... 37 Exit Without Saving................................................... 38 Chapter 5 5.1 5.2 5.3 5.4 5.5 Software Utilities .....................................39 IDE Driver Installation ............................................... 40 VGA Driver Installation.............................................. 44 LAN Driver Installation.............................................. 53 Audio Driver Installation ........................................... 66 USB2.0 Driver Installation......................................... 68 Safety Instructions Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging chips from electrostatic discharge, observe the following precautions: Do not remove boards or integrated circuits from their anti-static packaging until you are ready to install them. Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This helps to discharge any static electricity on your body. Wear a wrist-grounding strap, available from most electronic component stores, when handling boards and components. Fasten the ALLIGATOR clip of the strap to the end of the shielded wire lead from a grounded object. Please wear and connect the strap before handling the HS-7239 to protect yourself from the discharge of any static electricity through the strap. Please use an anti-static pad when putting down any components or parts or tools outside the computer. You may also use an anti-static bag instead of the pad. Please inquire from your local supplier for additional assistance in finding the necessary anti-static gadgets. NOTE: DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE COMPONENT WITHOUT ALL NECESSARY ANTI-STATIC PROTECTION. Chapter 1 General Description HS-7239 HS-7239M The HS-7239/HS-7239M is an Intel(R) 82852GM/82801DB chipset-based board designed for PCI-ISA Bus PGA 479 Intel(R) Pentium(R) M 1.2~1.7GHz CPU/Mobile Celeron(R) M 600MHz low power embedded CPU compatibility. The combination of these features makes the HS-7239/HS-7239M an ideal all-in-one industrial single board computer. Additional features include an enhanced I/O with DVI-I/CRT/LVDS Panel, LAN, audio, 4 COM and USB2.0 port interface. Its onboard ATA/33/66/100 connected to IDE drive interface architecture allows the HS-7239/HS-7239M to support data transfers of 33, 66 or 100MB/sec. for each IDE drive connection. Designed with the Intel(R) 82852GM/82801DB core logic chipset, the board supports all PGA 479 Pentium(R) M 1.2~1.7GHz CPU/Mobile Celeron(R) M 600MHz low power embedded CPU. The display controller is Intel(R) 82852GM supporting DVI-I/CRT display up to 1600 x 1200. It also provides 24-bit single channel or 48-bit dual channel LVDS Panel display interface. System memory is also sufficient with the one DDR socket that can support up to 1GB. It also provides one IDE interface Type II CompactFlash card adapter connector. 1 Additional onboard connectors include two internal and one external USB2.0 connectors providing faster data transmission, and one external RJ-45 connector for use of one 10/100 Base-TX Ethernet interfaces. 1.1 Major Features HS-7239 HS-7239M 2 The HS-7239/HS-7239M comes with the following features: HS-7239 provides PGA 479 for Intel(R) Pentium(R) M 1.2~1.7GHz CPU (R) (R) HS-7239M provides Intel Mobile Celeron M 600MHz low power embedded CPU One DDR socket with a max. capacity of 1GB Intel(R) 82852GM/82801DB system chipset Winbond W83627HF super I/O chipset Intel(R) 82852GM display controller Intel(R) 82562 LAN controller AC97 3D audio controller Fast PCI ATA/33/66/100 IDE controller CompactFlash card adapter, four COM, three USB2.0 ports Hardware Monitor function LVDS Panel display interface (optional) 1.2 Specifications CPU: HS-7239 provides PGA 479 for Intel(R) Pentium(R) M 1.2~1.7GHz CPU HS-7239M provides Intel(R) Mobile Celeron(R) M 600MHz low power embedded CPU Bus Interface: PCI-ISA Bus (no 3.3V output through goldfinger) Memory: One DDR socket supporting up to 1GB Chipset: Intel(R) 82852GM/82801DB I/O Chipset: Winbond W83627HF CompactFlash: One, Type II IDE interface adapter VGA: Intel(R) 82852GM for CRT display or CHRONTEL 7301 for DVI-I display, supporting up to 1600 x 1200 (DVI-I and CRT connector is optional) LVDS Panel: Supports 24-bit single channel or 48-bit dual channel LVDS Panel interface (optional) LAN: Intel(R) 82562 10/100 Based LAN Audio: AC97 3D audio controller IDE: Four IDE disk drives supporting ATA/33/66/100 with transfer rates of up to 33/66/100MB/sec. FDD: Supports up to two floppy disk drives Parallel: One enhanced bi-directional parallel port supporting SPP/ECP/EPP Serial Port: 16C550 UART-compatible RS-232/422/485 x 1 and RS-232 x 3 serial ports with 16-byte FIFO USB: Three USB2.0 ports, two internal and one external Keyboard/Mouse: PS/2 6-pin Mini DIN BIOS: Award PnP Flash BIOS 3 Watchdog Timer: Software programmable time-out intervals from 1~256 sec. CMOS: Battery backup Power Connector: One 4-pin power connector Temperature: 0~+60C (operating); -20~+80C (storage) Hardware Monitor: Winbond W83627HF Board Size: 18.6(L) x 12.2(W) cm 1.3 Board Dimensions 4 Chapter 2 Unpacking 2.1 Opening the Delivery Package The HS-7239/HS-7239M is packed in an anti-static bag. The board has components that are easily damaged by static electricity. Do not remove the anti-static wrapping until proper precautions have been taken. Safety Instructions in front of this manual describe anti-static precautions and procedures. 2.2 Inspection After unpacking the board, place it on a raised surface and carefully inspect the board for any damage that might have occurred during shipment. Ground the board and exercise extreme care to prevent damage to the board from static electricity. Integrated circuits will sometimes come out of their sockets during shipment. Make sure all integrated circuits, particularly the BIOS, processor, memory modules, ROM-Disk, and keyboard controller chip are firmly seated. The HS-7239/HS-7239M delivery package contains the following items: HS-7239/HS-7239M Board x 1 Utility CD Disk x 1 Cables Package x 1 Cooling Fan & Heat Sink x 1 Jumper Bag x 1 User's Manual 5 NO. 1 2 3 4 5 6 7 Cables Package Description Two USB flat cable with bracket x 1 ATA/100 IDE flat cable x 2 Floppy flat cable x 1 Parallel port flat cable with bracket x 1 Two COM flat cable with bracket x 2 MIC/Audio flat cable x 1 Keyboard/Mouse transfer cable x 1 If you want to use DVI-I device under WIN98 or WINNT, please purchase this cable separately. Optional Cable Part NO. Description 291-13010020 DVI-I to DVI+CRT cable It is recommended that you keep all the parts of the delivery package intact and store them in a safe/dry place for any unforeseen event requiring the return shipment of the product. In case you discover any missing and/or damaged items from the list of items, please contact your dealer immediately. 6 Chapter 3 Hardware Installation This chapter provides the information on how to install the hardware using the HS-7239/HS-7239M. This chapter also contains information related to jumper settings of switch, watchdog timer etc. 3.1 Before Installation After confirming your package contents, you are now ready to install your hardware. The following are important reminders and steps to take before you begin with your installation process. 1. Make sure that all jumper settings match their default settings and CMOS setup correctly. Refer to the sections on this chapter for the default settings of each jumper. (Set JP2 1-2) Go through the connections of all external devices and make sure that they are installed properly and configured correctly within the CMOS setup. Refer to the sections on this chapter for the detailed information on the connectors. Keep the manual and diskette in good condition for future reference and use. 2. 3. NOTE: Since AD22 has been assigned for ISA bridge at HS-7239/HS-7239M, please make sure do not use this address for other PCI cards to avoid confliction. In order to get detailed information, please contact technical support engineer. 7 3.2 Board Layout 8 3.3 Jumper JP1 JP2 Jumper List Default Setting Setting Page 16 18 COM 2 Use RS-232 or RS-422/485 Select: RS-232 Open Clear CMOS: Normal Operation 1-2 Short 3.4 Connector List Definition Reset Connector HDD LED Connector Power LED Connector MIC In/Audio Out Connector COM 1~COM 4 Connector (5x2 header) DVI-I Connector RJ-45 Connector 15-pin CRT Connector CompactFlash Connector 184-pin DIMM Socket Floppy Connector Fan Power Connectors Primary/Secondary IDE Connector Inverter Power In Connector RS-422/485 Connector PS/2 6-pin Mini DIN KB/MS Connector Parallel Connector 24-bit/48-bit LVDS Panel Connector 4-pin Power In Connector Internal/External USB Connector Connector CN1 CN3 CN4 CN5 CN6 / CN7 / CN8 / CN10 CN9 CN11 CN12 CN13 DM1 FD1 FN1 / FN2 IDE2 / IDE1 J2 J3 KB1 LP1 Panel2/Panel1 PW1 US1 / US2 Page 20 20 20 21 16 11 18 11 22 10 15 19 13 11 16 19 17 11 19 18 9 3.5 Configuring the CPU The HS-7239/HS-7239M provides 400MHz FSB Intel(R) Pentium(R) M 1.2~1.7GHz CPU. It offers the convenience in CPU installation with its auto-detect feature. After installing a new microprocessor onboard, the HS-7239/HS-7239M automatically identifies the frequency and clock speed of the installed microprocessor chip, thereby eliminating the need for user to do additional CPU configuration or hardware settings related to it. Heat Sink Installation Please smear the heat sink paste over CPU and 82852GM uniformly. Then secure the heat sink as the picture above 3.6 System Memory The HS-7239/HS-7239M provides one DDR socket at location DM1. The maximum capacity of the onboard memory is 1GB. 10 3.7 VGA Controller The onboard Intel 82852GM supports DVI-I/CRT/LVDS Panel display up to 1600 x 1200. The HS-7239/HS-7239M provides three methods of connecting VGA device. CN12 offers a single standard CRT connector (DB15), or CN9 offers DVI-I connector, or Panel2/Panel1 offer 24-bit/48-bit LVDS panel connectors. CN12: 15-pin CRT Connector (DB15) PIN Description PIN Description 1 3 5 7 9 11 13 15 RED BLUE GND GND N/C N/C OHSYNC SCL 2 4 6 8 10 12 14 GREEN N/C GND GND GND SDA OVSYNC 6 1 11 5 10 15 CN9: DVI-I Connector PIN Description PIN Description 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 TDC2J GND N/C DDCDATA TDC1J GND N/C GND TEC0GND N/C TLC RED BLUE GND 2 4 6 8 10 12 14 16 18 20 22 24 26 28 TDC2 N/C DDCCLK OVSYNC TDC1 N/C VCC5 HPDET TDC0 N/C GND TLC1 GREEN OHSYNC 26 28 29 17 24 27 1 8 25 11 J2: Inverter Power In Connector PIN 1 2 3 4 5 6 Description +12V +12V +5V BackLight Enabled LCD Enabled GND 1 6 Panel2: 24-bit LVDS Panel Connector PIN Description PIN Description 1 3 5 7 9 11 13 VCC3 GND B0M B1M B2M CLKBM B3M 2 4 6 8 10 12 14 VCC3 GND B0P B1P B2P CLKBP B3P 2 1 14 13 Panel1: 24-bit LVDS Panel Connector PIN Description PIN Description 1 3 5 7 9 11 13 VCC3 GND A0M A1M A2M CLKAM A3M 2 4 6 8 10 12 14 VCC3 GND A0P A1P A2P CLKAP A3P 2 1 14 13 NOTE: If using Panel2/Panel1 only, it just supports 24-bit LVDS Panel; If you want to use 48-bit LVDS Panel, please using Panel2 and Panel1 combinedly. 12 3.8 PCI E-IDE Drive Connector IDE2 and IDE1 are standard 40-pin daisy-chain driver connector that serves the PCI E-IDE drive provisions onboard the HS-7239/HS-7239M. A maximum of four ATA/33/66/100 IDE drives can be connected to the HS-7239/HS-7239M via IDE1 and IDE2. IDE2: Primary IDE Connector PIN 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 4 2 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 6 Description RESET PDATA 7 PDATA 6 PDATA 5 PDATA 4 PDATA 3 PDATA 2 PDATA 1 PDATA 0 GND PDREQ PIOW# PIOR# PIORDY PDACKInterrupt PDA1PDA0PCS1HDD Active PIN 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 Description GND PDATA 8 PDATA 9 PDATA 10 PDATA 11 PDATA 12 PDATA 13 PDATA 14 PDATA 15 N/C GND GND GND PD1GND N/C PATA66 PDA2PCS3GND 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 39 13 IDE1: Secondary IDE Connector PIN 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 4 2 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 6 Description RESET SDATA 7 SDATA 6 SDATA 5 SDATA 4 SDATA 3 SDATA 2 SDATA 1 SDATA 0 GND SDREQ SIOW# SIOR# SIORDY SDACKInterrupt SDA1SDA0SCS1HDD Active PIN 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 Description GND SDATA 8 SDATA 9 SDATA 10 SDATA 11 SDATA 12 SDATA 13 SDATA 14 SDATA 15 N/C GND GND GND SD1GND N/C SATA66 SDA2 SCS3GND 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 39 14 3.9 Floppy Disk Drive Connector The HS-7239/HS-7239M uses a standard 34-pin header connector, FD1, for floppy disk drive connection. A total of two FDD drives may be connected to FD1 at any given time. FD1: FDD Connector PIN 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 2 1 Description GND GND GND GND GND GND GND GND GND GND GND GND GND GND N/C GND N/C PIN 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 Description DRVDEN0 N/C DRVDEN1 INDEX# MTR0# DS1# DS0# MTR1# DIR# STEP# WDATA# WGATE# TRAK00# WRTPRT# RDATA# HDSEL# DSKCHG# 34 33 15 3.10 Serial Port Connectors The HS-7239/HS-7239M offers two NS16C550 compatible UARTs with Read/Receive 16-byte FIFO serial ports and four internal 10-pin headers. CN6~8/CN10: COM1~COM4 Connector (5x2 header) PIN Description PIN Description 1 3 5 7 9 DCD RXD TXD DTR GND 2 4 6 8 10 DSR RTX CTX RI N/C DCD 1 RXD 3 TXD DTR GND 5 7 9 2 DSR 4 RTX 6 CTX 8 RI 10 N/C J3: RS-422/485 Connector (3x2 header) PIN Description PIN Description 1 3 5 TXRX+ GND 2 4 6 TX+ RXVCC 2 1 6 5 JP1: COM2 Use RS-232 or RS-422/485 Select Options RS-232 (default) RS-422/485 Setting Open Short 1 2 16 3.11 Parallel Connector LP1 is a standard 26-pin flat cable connector designed to accommodate parallel port connection onboard the HS-7239/HS-7239M. LP1: Parallel Connector PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 Description PIN Strobe DATA 0 DATA 1 DATA 2 DATA 3 DATA 4 DATA 5 DATA 6 DATA 7 Acknowledge Busy Paper Empty Printer Select Printer Select LN# Auto Form Feed Description Auto Form Feed ERROR# Initialize Printer Select LN# GND GND GND GND GND GND GND GND GND 14 15 16 17 18 19 20 21 22 23 24 25 26 ERROR# Initialize GND GND GND GND GND GND GND GND Paper Empty GND 26 13 Printer Select 14 1 Strobe PDD0 PDD1 PDD2 PDD3 PDD4 PDD5 PDD6 PDD7 Acknowledge Busy 17 3.12 Ethernet Connector The HS-7239/HS-7239M provides one 10/100 Base-TX LAN interface connector. Please refer to the following for its pin information. CN11: RJ-45 Connector PIN Description PIN Description 1 3 5 7 TX+ RX+ R/C GND R/C GND 2 4 6 8 TXR/C GND RXR/C GND 2 TXR/C GND RXR/C GND 8 7 1 TX+ RX+ R/C GND R/C GND 3.13 USB Connector The HS-7239/HS-7239M provides one 8-pin internal connector at location US1 and one 4-pin external connector, at locations US2, for three USB2.0 connections to the HS-7239/HS-7239M. US1: Internal USB2.0 Connector PIN Description PIN Description 1 3 5 7 VCC BD0BD0+ GND 2 4 6 8 VCC BD1BD1+ GND VCC BD0BD0+ GND 7 8 1 2 VCC BD1BD1+ GND US2: External USB2.0 Connector PIN Description PIN Description 1 3 VCC BD0+ 2 4 BD0GND 3.14 CMOS Data Clear The HS-7239/HS-7239M has a Clear CMOS jumper on JP2. JP2: Clear CMOS Options Normal Operation (default) Clear CMOS Settings Short 1-2 Short 2-3 1 3 IMPORTANT: Before you turn on the power of your system, please set JP2 to short 1-2 for normal operation. 18 3.15 Power and Fan Connectors HS-7239/HS-7239M provides one 4-pin power in connector at PW1. PW1: 4-pin Power In Connector PIN Description 1 2 3 4 VCC GND GND +12V FN1 and FN2 onboard HS-7239/HS-7239M are 3-pin fan power connectors. FN1: Fan Power Connector PIN 1 2 3 Description GND +12V Fan In 1 1 GND +12V FAN In 1 3 FN2: Fan Power Connector PIN 1 2 3 Description GND +12V Fan In 2 1 GND +12V FAN In 2 3 3.16 Keyboard/Mouse Connector The HS-7239/HS-7239M offers one possibility for keyboard/mouse connection. The connections are done via KB1 for an external PS/2 type keyboard/mouse connection. KB1: PS/2 6-pin Mini DIN Keyboard/Mouse Connector PIN 1 2 3 4 5 6 Description Keyboard Data Mouse Data GND +5V Keyboard Clock Mouse Clock Keyboard Clock 5 3 GND 1 Data Keyboard Mouse Clock 6 2 Mouse Data 4 +5V 19 3.17 System Front Panel Connectors The HS-7239/HS-7239M has one LED at location CN3 that indicates the system front panel status. This visual feature of the HDD LED may also be connected to an external HDD LED via connector CN8. At location CN1 is Reset button connector. CN1: Reset Button Connector PIN 1 2 Description GND Reset 1 2 CN3: HDD LED Connector PIN 1 2 Description VCC HDD LED 1 2 CN4: Power LED Connector PIN 1 2 Description 150 Pull +5V Suspend LED 1 2 3.18 Watchdog Timer Once the Enable cycle is active, a Refresh cycle is requested before the time-out period. This restarts counting of the WDT period. When the time counting goes over the period preset of WDT, it will assume that the program operation is abnormal. A System Reset signal will re-start when such error happens. The following sample programs show how to Enable, Disable and Refresh the Watchdog Timer: ;---------------------------------------------------------------------------------; Enter the WDT function mode, interruptible double-write ;---------------------------------------------------------------------------------MOV DX, 2EH MOV AL, 87H OUT DX, AL OUT DX, AL MOV DX, 2EH MOV AL, 07H OUT DX, AL MOV DX, 2FH MOV AL, 08H OUT DX, AL MOV DX, 2EH MOV AL, F5H 20 OUT MOV MOV OUT MOV MOV OUT MOV DX, AL DX, 2FH AL, 80H DX, AL DX, 2EH AL, F7H DX, AL DX, 2FH ; select CRF0 MOV AL, 00H OUT DX, AL MOV DX, 2EH MOV AL, F6H OUT DX, AL MOV DX, 2FH MOV AL, 00H ; * 00H=Disabled OUT DX, AL ;--------------------------------------------------------------------------------; Exit extended function mode ;------------- ------------------------------------------------------------------MOV DX, 2EH MOV AL, AAH OUT DX, AL User can also use AL, 00H's defined time for reset purposes, e.g.00H for Disable, 01H = 1sec, 02H = 2sec to FFH = 255sec. 3.19 Audio Connectors The HS-7239/HS-7239M has an onboard AC97 3D audio interface. The following tables list the pin assignments of the MIC In/Line Out connectors. CN5: MIC In/Line Out Connector PIN 1 3 5 7 Description AOUT_L GND MIC In GND PIN 2 4 6 8 Description AOUT_R GND N/C GND 2 1 8 7 21 3.20 CompactFlash Connector The HS-7239/HS-7239M also offers an optional CompactFlash connector which is IDE interface located at the solder side of the board. The designated CN13 connector, once soldered with an adapter, can hold CompactFlash cards of various sizes. Please turn off the power before inserting the CF card. Inserting a CompactFlash card into the adapter is not a difficult task. The socket and card are both keyed and there is only one direction for the card to be completely inserted. Refer to the diagram below for the traditional way of inserting the card. PC Si B de So V i l de ew r tF la om pa c sh T C M 22 CE Fa M a br de iq in ue J Au apa Ja n / po n CF Re ar Si de Chapter 4 Award BIOS Setup The HS-7239/HS-7239M uses Award BIOS for the system configuration. The Award BIOS setup program is designed to provide the maximum flexibility in configuring the system by offering various options that could be selected for end-user requirements. This chapter is written to assist you in the proper usage of these features. 4.1 Starting Setup The Award BIOS is immediately activated when you first power on the computer. The BIOS reads the system information contained in the CMOS and begins the process of checking out the system and configuring it. When it finishes, the BIOS will seek an operating system on one of the disks and then launch and turn control over to the operating system. While the BIOS is in control, the Setup program can be activated in one of two ways: 1. By pressing Press DEL to enter SETUP. If the message disappears before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or pressing the "RESET" button on the system case. You may also restart by simultaneously pressing 23 4.2 Using Setup In general, you use the arrow keys to highlight items, press Up arrow Down arrow Left arrow Right arrow Esc key Move to previous item Move to next item Move to the item in the left hand Move to the item in the right hand Main Menu -- Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu -Exit current page and return to Main Menu Increase the numeric value or make changes Decrease the numeric value or make changes Increase the numeric value or make changes Decrease the numeric value or make changes General help, only for Status Page Setup Menu and Option Page Setup Menu Change color from total 16 colors. F2 to select color forward, (Shift) F2 to select color backward Calendar, only for Status Page Setup Menu Reserved Restore the previous CMOS value from CMOS, only for Option Page Setup Menu Load the default CMOS value from BIOS default table, only for Option Page Setup Menu Load the default Reserved Reserved Save all the CMOS changes, only for Main Menu PgUp key PgDn key + key - key F1 key (Shift)F2 key F3 key F4 key F5 key F6 key F7 key F8 key F9 key F10 key 4.2.1 Getting Help Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press 24 4.3 Main Menu Once you enter the Award BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select among the items and press Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status EscQuit F9Menu in BIOS F10Save & Exit Setup Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving Select Item Time, Date, Hard Disk Type... NOTE: A brief description of the highlighted choice appears at the bottom of the screen. 25 4.4 Standard CMOS Features The Standard Setup is used for the basic hardware system configuration. The main function is for Data/Time and Floppy/Hard Disk Drive settings. Please refer to the following screen for the setup. When the IDE hard disk drive you are using is larger than 528MB, you must set the HDD mode to LBA mode. Please use the IDE Setup Utility in BIOS SETUP to install the HDD correctly. Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Date (mm:dd:yy) Time (hh:mm:ss) IDE IDE IDE IDE Mon, Aug 9 2004 10 : 32 : 57 [Auto] [Auto] [Auto] [Auto] [1.44M, 3.5in.] [EGA/VGA] [All, But Keyboard] 640K 252928K 253952K +/-/PU/PD: Value F10: Save ESC: Quit F1: General Help F6: Fail-Safe Defaults F7: Optimized Defaults Item Help Menu Level Change the day, month, year and century Primary Master Primary Slave Secondary Master Secondary Slave Drive A Video Halt On Base Memory Extended Memory Total Memory : Select Item F5: Previous Values 26 4.5 Advanced BIOS Features This section allows you to configure your system for the basic operation. You have the opportunity to select the system's default speed, boot-up sequence, keyboard operation, shadowing and security. Phoenix - AwardBIOS CMOS Setup Utility Advanced CMOS Features CPU Feature Hard Disk Boot Priority Virus Warning CPU L1 Cache CPU L2 Cache Quick Power On Self Test First Boot Device Second Boot Device Third Boot Device Boot Other Device Boot Up Floppy Seek Boot Up NumLock Status Gate A20 Option OS Select For DRAM > 64MB : Select Item F5: Previous Values [Press Enter] [Press Enter] [Disabled] [Enabled] [Enabled] [Enabled] [Floppy] [Hard Disk] [LS120] [Enabled] [Enabled] [On] [Fast] [Non-OS2] F10: Save F6: Fail-Safe Defaults Item Help Menu Level +/-/PU/PD: Value ESC: Quit F1: General Help F7: Optimized Defaults Phoenix - AwardBIOS CMOS Setup Utility CPU Feature Thermal Management TM2 Bus Ratio TM2 Bus VID [Thermal Monitor 1] [0 X] [0.700V] Item Help Menu Level Thermal Monitor 1 (On die throtting) Thermal Monitor 2 Ratio & VID transition) ESC: Quit F1: General Help F7: Optimized Defaults : Select Item +/-/PU/PD: Value F10: Save F5: Previous Values F6: Fail-Safe Defaults Phoenix - AwardBIOS CMOS Setup Utility Hard Disk Boot Priority 1. 2. 3. 4. 5. 6. 7. 8. Pri.Master : Pri.Slave : Sec.Master : Sec.Slave : USBHDD0 : USBHDD1 : USBHDD2 : Bootable Add-in Cards : Select Item +/-/PU/PD: Value F10: Save F5: Previous Values F6: Fail-Safe Defaults Item Help Menu Level ESC: Quit F1: General Help F7: Optimized Defaults 27 4.6 Advanced Chipset Features This section allows you to configure the system based on the specific features of the installed chipset. This chipset manages bus speeds and the access to the system memory resources, such as DRAM and the external cache. It also coordinates the communications between the conventional ISA and PCI buses. It must be stated that these items should never be altered. The default settings have been chosen because they provide the best operating conditions for your system. You might consider making any changes only if you discover that the data has been lost while using your system. Phoenix - AwardBIOS CMOS Setup Utility Advanced Chipset Features DRAM Timing Selectable CAS Latency Time Active to Precharge Delay DRAM RAS# to CAS# Delay DRAM RAS# Precharge DRAM Data Integrity Mode MGM Core Frequency System BIOS Cacheable Video BIOS Cacheable Memory Hole At 15M-16M Delayed Transaction Delay Prior to Thermal AGP Aperture Size (MB) ** ON-chip VGA Setting ** On-chip VGA On-chip Frame Buffer size Boot Display Panel Number : Select Item F5: Previous Values [By SPD] [2.5] [7] [3] [3] [Non-ECC] [Auto Max 266MHz] [Enabled] [Enabled] [Disabled] [Enabled] [16 Min] [64] [Enabled] [32MB] [VBIOS Default] [2] F10: Save Item Help Menu Level +/-/PU/PD: Value ESC: Quit F1: General Help F6: Fail-Safe Defaults F7: Optimized Defaults 28 4.7 Integrated Peripherals The IDE hard drive controllers can support up to two separate hard drives. These drives have a master/slave relationship that is determined by the cabling configuration used to attach them to the controller. Your system supports two IDE controllers--a primary and a secondary--so you can install up to four separate hard disks. PIO means Programmed Input/Output. Rather than having the BIOS issue a series of commands to affect the transfer to or from the disk drive, PIO allows the BIOS to tell the controller what it wants and then let the controller and the CPU perform the complete task by themselves. This is much simpler and more efficient (also faster). Phoenix - AwardBIOS CMOS Setup Utility Integrated Peripherals OnChip IDE Device Onboard Device SuperIO Device Onboard Lan Boot ROM Onboard Serial Port 3 Serial Port 3 Use IRQ Onboard Serial Port 4 Serial Port 4 Use IRQ [Press Enter] [Press Enter] [Press Enter] [Disabled] [3E8] [IRQ10] [2E8] [IRQ11] Item Help Menu Level : Select Item +/-/PU/PD: Value F10: Save ESC: Quit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Phoenix - AwardBIOS CMOS Setup Utility OnChip IDE Device On-Chip Primary PCI IDE IDE Primary Master PIO IDE Primary Slave PIO IDE Primary Master UDMA IDE Primary Slave UDMA On-Chip Secondary PCI IDE IDE Secondary Master PIO IDE Secondary Slave PIO IDE Secondary Master UDMA IDE Secondary Slave UDMA IDE HDD Block Mode : Select Item F5: Previous Values [Enabled] [Auto] [Auto] [Auto] [Auto] [Enabled] [Auto] [Auto] [Auto] [Auto] [Enabled] Item Help Menu Level +/-/PU/PD: Value F10: Save ESC: Quit F1: General Help F6: Fail-Safe Defaults F7: Optimized Defaults 29 Phoenix - AwardBIOS CMOS Setup Utility Onboard Device USB Controller USB 2.0 Controller USB Keyboard Support USB Mouse Support AC97 Audio Init Display First [Enabled] [Enabled] [Disabled] [Disabled] [Auto] [PCI Slot] Item Help Menu Level : Select Item +/-/PU/PD: Value F10: Save ESC: Quit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Phoenix - AwardBIOS CMOS Setup Utility SuperIO Device Onboard FDC Controller Onboard Serial Port 1 Onboard Serial Port 2 UART Mode Select RxD, TxD Active IR Transmission Delay UR2 Duplex Mode Use IR Pins Onboard Parallel Port Parallel Port Mode EPP Mode Select ECP Mode Use DMA : Select Item F5: Previous Values [Enabled] [3F8/IRQ4] [2F8/IRQ3] [Normal] [Hi, Lo] [Enabled] [Half] [IR-Rx2Tx2] [378/IRQ7] [SPP] [EPP1.7] [3] +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults Item Help Menu Level ESC: Quit F1: General Help F7: Optimized Defaults 30 4.8 Power Management Setup The Power Management Setup allows user to configure the system for saving energy in a most effective way while operating in a manner consistent with his own style of computer use. Phoenix - AwardBIOS CMOS Setup Utility Power Management Setup Power Management Video Off Method Video Off In Suspend Suspend Type Suspend Mode HDD Power Down CPU THRM-Throttling ** Reload Global Timer Events ** Primary IDE 0 Primary IDE 1 Secondary IDE 0 Secondary IDE 1 FDD, COM, LPT Port PCI PIRQ[A-D]# : Select Item [User Define] [DPMS] [Yes] [Stop Grant] [Disabled] [Disabled] [50.0%] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] F10: Save Item Help Menu Level +/-/PU/PD: Value ESC: Quit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults 31 4.9 PnP/PCI Configurations This section describes the configuration of the PCI bus system. PCI, or Peripheral Components Interconnect, is a system that allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings. Phoenix - AwardBIOS CMOS Setup Utility PnP/PCI Configurations Reset Configuration Data Resources Controlled By X IRQ Resources PCI/VGA Palette Snoop [Disabled] [Auto(ESCD)] Press Enter [Disabled] Item Help Menu Level Default is Disabled. Select Enabled to reset Extended System Configuration Data ESCD) when you exit Setup if you have Installed a new add-on And the system Reconfiguration has Caused such a serious Conflict that the OS Cannot boot ESC: Quit F1: General Help : Select Item +/-/PU/PD: Value F10: Save F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults 32 4.10 PC Health Status Phoenix - AwardBIOS CMOS Setup Utility PC Health Status CPU Warning Temperature Current SYSTEM Temperature Current CPUFAN Speed VCORE +3.3V +5V +12V VBAT(V) [Disabled] Item Help Menu Level : Select Item +/-/PU/PD: Value F10: Save ESC: Quit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults 4.11 Frequency/Voltage Control Phoenix - AwardBIOS CMOS Setup Utility Frequency/Voltage Control Auto Detect PCI Clk Spread Specturm [Enabled] [Disabled] Item Help Menu Level : Select Item +/-/PU/PD: Value F10: Save ESC: Quit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults 33 4.12 Load Fail-Safe Defaults When you press Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Load Fail-Safe Defaults (Y/N)? N word PnP/PCI Configurations PC Health Status EscQuit F9Menu in BIOS F10Save & Exit Setup Save & Exit Setup Exit Without Saving Select Item Time, Date, Hard Disk Type... 34 4.13 Load Optimized Defaults When you press Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Manageme Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password word Load Optimized Defaults (Y/N)? N PnP/PCI Configurations PC Health Status EscQuit F9Menu in BIOS F10Save & Exit Setup Save & Exit Setup Exit Without Saving Select Item Time, Date, Hard Disk Type... 4.14 Set Supervisor/User Password Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Manageme Enter Password: Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password word Save & Exit Setup Exit Without Saving Select Item PnP/PCI Configurations PC Health Status EscQuit F9Menu in BIOS F10Save & Exit Setup Time, Date, Hard Disk Type... 35 You can set either supervisor or user password, or both of them. The differences between are: supervisor password: can enter and change the options of the setup menus. user password: just can only enter but do not have the right to change the options of the setup menus. When you select this function, the following message will appear at the center of the screen to assist you in creating a password. ENTER PASSWORD: Type the password, up to eight characters in length, and press 36 4.15 Save & Exit Setup Press Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Manageme Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password word SAVE to CMOS and EXIT (Y/N)? N PnP/PCI Configurations PC Health Status EscQuit F9Menu in BIOS F10Save & Exit Setup Save & Exit Setup Exit Without Saving Select Item Time, Date, Hard Disk Type... 37 4.16 Exit Without Saving Pressing Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Manageme Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password word Quit without Saving (Y/N)? N PnP/PCI Configurations PC Health Status EscQuit F9Menu in BIOS F10Save & Exit Setup Save & Exit Setup Exit Without Saving Select Item Time, Date, Hard Disk Type... 38 Chapter 5 Software Utilities This chapter contains the detailed information of IDE, VGA, LAN, audio and USB2.0 driver installation procedures. The utility disk that comes with the delivery package contains an auto-run program that invokes the installation programs for the IDE, VGA, LAN and Audio drivers. The following sections describe the installation procedures of each driver based on Win 95/98, Win 2000 and Win NT operating systems. It is recommended that you install the drivers matching the sections listed in this chapter. The drivers are located in the following directories of the utility disk: Chipset driver: \INF VGA driver: LAN driver: Audio driver: \VGA\855GME \LAN\I82540 \Audio\AC97_ALC201 USB2.0 driver: \USB20 39 5.1 1. IDE Driver Installation Insert Utility CD Disk to your CD ROM drive. The main menu will pop up as shown below. Select on the HS-7239 button to launch the installation program. 2. Click on the INF Driver button to continue. 40 3. Click on the appropriate OS button to continue. 4. Immediately after clicking the IDE button in Step 1, the program launches the InstallShield Wizard that will assist you in the installation process. Click on the Next > button to proceed. 41 5. The Intel OEM Software License Agreement dialog box then appears on the screen. Choose Yes to proceed. 6. When the Readme Information dialog box pops up, just click on the Next> button to proceed. 42 7. Once the Install Shield Wizard finishes updating your system, it will prompt you to restart the computer. Tick on the Yes, I want to restart my computer now followed by a click on the Finish button to reboot. Only after your computer boots will the new settings take effect. NOTE: WIN98/2K/XP IDE driver installations are the same. 43 5.2 NOTE: VGA Driver Installation You need to buy a Y-cable extraneously, if you use DVI-I under WIN98 or WINNT. 5.2.1 Win 98 1. Insert Utility CD Disk into your CD ROM drive. The main menu will pop up as shown below. Select on the HS-7239 button to launch the installation program. 2. Click on the VGA Driver button to continue. 44 3. Click on the WIN9X button to continue. 4. When the dialog box below appears, make sure you close all other Windows applications then click on the Next > button to proceed. 45 5. The Intel OEM Software License Agreement dialog box then appears on the screen. Choose Yes to proceed. 6. Once the setup program finishes copying files into your system, it will prompt you to restart the computer. Tick on the Yes, I want to restart my computer now followed by a click on the Finish button to reboot. Only after your computer boots will the new settings take effect. 46 5.2.2 Win NT NOTE: 1. Please make sure you have already installed Service Pack 6.0. Insert Utility CD Disk into your CD ROM drive. The main menu will pop up as shown below. Select on the HS-7239 button to launch the installation program. 2. 3. Click on the VGA Driver button to continue. Click on the WINNT button to continue. 47 4. When the dialog box below appears, make sure you close all other Windows applications then click on the Next > button to proceed. 5. The Intel OEM Software License Agreement dialog box then appears on the screen. Choose Yes to proceed. 48 6. Once the setup program finishes copying files into your system, it will prompt you to restart the computer. Tick on the Yes, I want to restart my computer now followed by a click on the Finish button to reboot. Only after your computer boots will the new settings take effect. 5.2.3 Win 2000 1. Insert Utility CD Disk into your CD ROM drive. The main menu will pop up as shown below. Select on the HS-7239 button to launch the installation program. 49 2. Click on the VGA Driver button to continue. 3. Click on the WIN2K button to continue. 50 4. When the dialog box below appears, make sure you close all other Windows applications then click on the Next > button to proceed. 5. The Intel OEM Software License Agreement dialog box then appears on the screen. Choose Yes to proceed. 51 6. Once the setup program finishes copying files into your system, it will prompt you to restart the computer. Tick on the Yes, I want to restart my computer now followed by a click on the Finish button to reboot. Only after your computer boots will the new settings take effect. NOTE: WINXP driver installation is the same as WIN2K. 52 5.3 1. LAN Driver Installation 5.3.1 Win 98 Insert Utility CD Disk into your CD ROM drive. The main menu will pop up as shown below. Select on the HS-7239 button to launch the installation program. 2. Click on the LAN Driver button to continue. 53 3. Click on the WIN9X button to continue. 4. When the dialog box below appears, make sure you close all other Windows applications then click on the Install Base Driver button to proceed. 54 5. The Intel OEM Software License Agreement dialog box then appears on the screen. Choose Accept to proceed. 6. Choose the drivers install location. (ex: c:\IntelPRO) 55 7. Once the setup program finishes copying files into your system, it will prompt you to restart the computer. Tick on the Restart now to reboot. Only after your computer boots will the new settings take effect. 5.3.2 Win NT NOTE: 1. Please make sure you have already installed Service Pack 6.0. The system automatically detects the absence of Windows NT Networking. Click on the Yes button to start installation. 2. Tick on the Wired to the network once the following screen appears. Click on the Next> to proceed. 56 3. Click on the Start Search button for the program to locate the Network Adapter. 4. Once setup finishes the search, it will list a number of adapters for you to choose from. Press on the Have Disk button to assign the driver path location. 57 5. Setup now asks you for the location of the driver. When you have entered the new driver path, press on the OK button to continue. 6. When Setup finds the information it needs about the new driver, it will display the device it found on the following screen. Please choose "Intel(R) PRO/100 Family Adapter". Press on the OK button to accept and proceed. 7. Setup then returns to Network Setup Wizard screen and displays your new Network Adapter. Click on Next to continue. 58 8. The Network Setup Wizard then allows you to set the Network Protocols on your network. Select the appropriate protocol and then click on Next to continue. 9. Before Setup starts installing the components found and the settings you made, it will give you the option to proceed or go back for changes from the following screen. Click on the Next button once you are sure of your devices. 59 10. Windows NT Setup will then need to copy files necessary to update the system information. Specify the path then press Continue. 11. When Setup asks if you wish to change the TCP/IP settings of your system, select them appropriately. The default choice is No. 12. Setup then starts the Networking installation and copies the files. 13. When the screen below appears, click on Next> to continue. 60 14. Setup then prompts you that it is ready to start the network. You may complete the installation thereafter. Click on Next> to continue. 15. Assign the workgroup or domain setting of your computer. Click on Next to continue. 61 16. When the dialog box below appears, it means your driver is install completed. Click Finish button to proceed. 17. Click on the Yes button to restart your computer. The LAN driver installation for WIN NT4.0 is now complete. 62 5.3.3 WIN2K 1. Insert utility CD disk into your CD ROM drive. The main menu will pop up as shown below. Select on the HS-7239 button to launch the installation program. 2. Click on the LAN Driver button to continue. 63 3. Click on the WIN2K button to continue. 4. When the dialog box below appears, make sure you close all other Windows applications then click on the Install Base Driver button to proceed. 64 5. The Intel OEM Software License Agreement dialog box then appears on the screen, Choose Yes to proceed. 6. Choose driver install location. (ex: c:\IntelPRO) 7. When setup is finished, please reboot your computer to complete. NOTE: WINXP driver installation is the same with WIN2K. 65 5.4 1. Audio Driver Installation Insert Utility CD Disk into your CD ROM drive. The main menu will pop up as shown below. Select on the HS-7239 button to launch the installation program. 2. Click on the Audio Driver button to continue. 66 3. Choose on the OS button to continue. 4. When the dialog box below appears, make sure you close all other Windows applications then click on the Next > button to proceed. 4. Once the InstallShield Wizard completes the operation and update of your AC'97 driver, it will ask you to remove disks from their drives, and prompt you to restart your system. Tick on the Yes, I want to restart my computer now. Afterwards, click on the Finish button to complete the installation process. The system changes you made will take effect after the system restarts. 67 NOTE: WIN98/2K/NT audio driver installations are the same as WINXP. 5.5 1. USB2.0 Driver Installation 5.5.1 Win 98 With the Utility CD Disk still in your CD ROM drive, right click on "My Computer" icon from the Windows menu. Select on System Properties and then proceed to the Device Manager from the main menu. 68 2. Select on Other Devices from the list of devices then double-click on PCI Universal Serial Bus. 3. The PCI Universal Serial Bus Properties screen then appears, allowing you to re-install the driver. Select Driver from the main menu to proceed. 69 4. When the dialog box below appears, make sure you close all other Windows applications then click on the Next > button to proceed. 5. Tick on the "Search for a better driver" once the following screen appears. Click on the Next to proceed. 70 6. Once the program returns to the Add New Hardware Wizard screen, your specified location will appear. Press on the Next button to continue 7. When Setup finds the information it needs about the new driver, it will display the device it found on the following screen. Press on the Next button to accept and proceed. 71 8. Once the InstallShield Wizard completes the operation and update of your USB2.0 driver. Click on the Finish button to complete the installation process. 5.5.2 Win 2000 1. With the Utility CD Disk still in your CD ROM drive, right click on "My Computer" icon from the Windows menu. Select on System Properties and then proceed to the Device Manager from the main menu. Select on Other Devices from the list of devices then double-click on PCI Universal Serial Bus. 2. 72 3. The PCI Universal Serial Bus Properties screen then appears, allowing you to re-install the driver. Select Driver from the main menu to proceed. 4. When the dialog box below appears, make sure you close all other Windows applications then click on the Next > button to proceed. 73 5. Tick on the "Search for a suitable driver" once the following screen appears. Click on the Next to proceed. 6. Once the program returns to the Add New Hardware Wizard screen, your specified location will appear. Press on the Next button to continue 74 7. Choose the driver disk location. 8. Once the InstallShield Wizard completes the operation and update of your USB2.0 driver. Click on the Finish button to complete the installation process. 75 5.5.3 Win XP 1. Insert Utility CD Disk into your CD ROM drive. The main menu will pop up as shown below. Select on the HS-7239 button to launch the installation program. 2. Click on the USB2.0 Driver button to continue. 76 3. Click on the WINXP button to continue. 4. When the dialog box below appears, make sure you close all other Windows applications then click on the Next > button to proceed. 77 5. Once the InstallShield Wizard completes the operation and update of your USB2.0 driver. Click on the Finish button to complete the installation process. 78 |
Price & Availability of HS-7239
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |